High- Density Fiber Optic Patch Panel For Data Center
With new advances in networking technology, such as the introduction of 40 Gbps switches, as well as the 100/120 Gbps switches in the not too distant future, IT professionals will be confronted with the problem of connecting high-speed switches not only to high-speed devices but also to legacy, slower-speed devices in a flexible, adjustable and cost-effective manner. High-Density Fiber Patch Panel solutions are the most convenient approach for solving the problem of connecting equipment of varying speeds in a data center environment.
HD-Fiber Optic Patch Panels are applied to MDA, IDA, or HDA areas of the data center. It is designed for the management of the MPO-LC Module and MPO Adapter Panels. It can be installed in the 19-inch rack and cabinet.
Features & Benefits:
** Sliding-type with Ergonomic design, convenient installation, and maintenance
** Radius-protected patch cord routing, easy for cable management and improved density.
** The module box can be installed or removed from the front or rear of the distribution frame.
** 3* 16F module or 3*6-port adapter panels in each layer.
Dimensions:
1HU: 483 x 375x 1HU (mm)
2HU: 483 x 375 x 2HU (mm)
4HU: 483 x 375 x 4HU (mm)
1HU Rackmount patch panels,—Up to 144 fiber for 2HU
2HU Rackmount patch panels, —Up to 288 fiber for 2HU
4HU Rackmount patch panels
—Up to 576 fiber for 4HU
HD 16F MPO-LC Module
16F MPO-LC modules are used to break out the 16F MPO Connectors terminated on trunk cables into LC connectors to facilitate patching into the SFP transceiver of the system equipment ports.
The module is used together with 1HU, 2HU, and 4HU HD-Fiber Distribution Frame.
The LC adaptor panel in the front of the module box is used for connecting the equipment or between the module box, and MPO adapter at rear is used for connecting MPO pre-connected trunk cables.
Features & Benefits:
* The front panel of the module box is equipped with 8 duplex LC adapters, and the rear panel is equipped with 2 MPO adapter ports which can be equipped with 1 16F MPO adapter or 2 8F MPO adapters.
* The module box can be installed or removed from the front or rear of HD-Fiber Patch Panel.
* Density with LC interface: 144F for 1HU; 288F for 2HU; 576F for 4HU.
*100% pre-termination to ensure the low insertion loss for demanding high-speed networks.
HD 16F MPO-LC Module
The 6 port MPO connector panel is mainly used for jumping pre-terminal main cable and the fanout cable of the data center.
The adapter panel is used with modules together with 1HU, 2HU, and 4HU HD-Fiber Distribution Frame.
Features & Benefits
* The MPO panel can be installed or removed from the front or rear of HD-Fiber Patch Panels.
* Density with MPO
* 9 pcs adaptor for 1HU; 18pcs adaptor for 2HU; 36pcs adaptor for 4HU.
High-density fiber patch panel offers the highest level of scalability and highest density in the market. They enable a seamless distribution for bandwidth from 100G to 40G to 10G. Gehee Comm provides high-density fiber patch panels with various configurations. Any one of them would be an excellent option for your network.
