MPO/MTP HD Cables -- Game Changer Of Data Center Cabling
With the rapid development of data centers, super-large data centers are planning to move from 100G to 400G. High-density data center is becoming the director of the next-generation data center. Today density is the key factor that determines the capacity of the facility. The reliability, manageability, and compatibility of cabling are the most basic guarantees for speed improvements in data centers.
In view of the current situation of data centers, Optotop launched its solution "High-Density Fiber Cabling System based on the 16F MPO Connector ".This solution is simple and easy to manage. While meeting the existing requirements of 40G/100G, it also provides a solid solution for the upcoming deployment of 400G Ethernet. It will reduce customers' repeated investment in fiber resources and realize customers' maximum cost control advantages.
MPO/MTP connector can support 2, 4, 8, 12,16, or 24 fibers, and even up to 72 fibers in the tiniest of spaces.
MTP/MPO fiber cables fall on MTP/MPO trunk cables and MTP/MPO harness cables.
16F MPO Pre-terminated Trunk Cable
The 16F MPO pre-terminated trunk cable is mainly used for the connection of optical fiber between MDA, HDA, and EDA areas in the data center. With the 16-core high-quality optical cable and MPO components, it can fully meet the strict requirements of a 400G transmission network with low insertion loss, high return loss. It can also downward compatible with the100G, 40G, 25G, 10G transmission by using the fanout cable and MPO-LC Module.
Features & Benefits
* Low insertion loss and high return loss, meeting the transmission standard of 400G optical fiber.
* Follows the 400G OSFP and 400G QSFP-DD standard by using 16F MPO optical fiber connector, compatible with existing optical fiber transmission of 40G and 100G by using the fanout cable and MPO-LC module.
* The trunk cable is based on 16F fiber which reduces the complexity of installation and deployment; and achieving 100% utilization of the fiber cable.
* All of the products meet the relevant standards of environmental policies, environmental protection, and flame retardant.
16F MPO Pre-terminated Jumper Cable
The OSFP-SR8 or MPO jumper with the 16F MPO connector is used for the connection between OSFP-SR8 400G optical transceiver module in the data center.
It can fully meet the harsh high-speed network with Low insertion loss, high return loss by using the high-quality cable and MPO components.
Features & Benefits
* Smaller cable bending radius to save the space, facilitate ventilation and heat dissipation equipment by using 3.0mm, 3.6mm round cable
* Meet the harsh high-speed network with Low insertion loss, high return loss
* OM3, OM4, and other optical fibers are available according to the different requirements of the customers.
LC Duplex Jumper
LC duplex jumpers use the unique Uni-boot LC connector and 2.0mm round cable. With the bending insensitive fiber, it has super bending performance. It reduces the space occupied by wiring and reduces the cable congestion compared with the traditional duplex jumper, it improves the efficiency of jumper management and laying, it also improves the air circulation of equipment.
Features & Benefits:
* Unique small round 2mm duplex cable
* Enhances the ease of installation and maintenance of connectors in high-density applications by using Uni-boot duplex connector.
* OM3, OM4, and other optical fibers are available according to the different requirements of the customers.
16F MPO to 2* 8F Distribution Cable
This specification distribution cable is used for the jumper connection between data center equipment and the main trunk cable. It is often used with 16F trunk cable.
The 16F MPO connector is branched into two 8-core MPO connectors, one end is connected to the 16F MPO trunk, and the other end is connected to two channels of 40G or 100G transmission.
It can fully meet the harsh high-speed network with Low insertion loss, high return loss by using the high-quality cable and MPO components.
Features & Benefits:
* Smaller cable bending radius to save the space, facilitate ventilation and heat dissipation equipment by using 3.0mm, 3.6mm round cable
* Meet the harsh high-speed network requirement of 400G with Low insertion loss, high return loss
* OM3, OM4, and other optical fibers are available according to the different requirements of the customers.
Contact Person: Ms. Yu Ying
Tel: +86 15727094728
